![Image](https://media.giphy.com/media/d3Kq5w84bzlBLVDO/giphy.gif)
![Image](https://i.imgur.com/HebSASa.jpg)
![Image](https://i.imgur.com/LPNTiUt.jpg)
![Image](https://i.imgur.com/RUOS0BB.jpg)
![Image](https://i.imgur.com/5QLD6nZ.jpg)
![Image](https://i.imgur.com/JYRsK7d.jpg)
Worked perfectly on the very first power-up!
I have it socketed completely. I missed that the 7432 has a different pincount (14) than the other IC's (16 & 2)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
I'm su-per excited and happy with my Gigatron. It's a fun project to do; it gave me a few hours of very relaxed soldering and tinkering and it's a beauty to see. It's going to get a nice prominent place in my mancave!
The manual is great (I diverged from it by the time the IC's were up since the sockets were still in the mail) and the entire product is well thought out and executed excellently. Kudo's to Marcel en Walter! Well done, great job!
One sidenote I have: My multimeter (el-cheapo) only read 1.25V instead of the 1.5V~2.5V as mentioned in the manual when the time came to do check the voltage after the crystal went in. I'm sure the meter is at fault here but I thought it would be worth a mention.