Finding parts?

A place to eternalise your Gigatron build photos. From box to BASIC.
Forum rules
Use this forum to show off your build photos. For build issues, please consult the directions in the sticky post on top instead.
Posts: 21
Joined: 01 Nov 2018, 12:02

Re: Finding parts?

Post by bmwtcu » 08 Oct 2020, 23:42

Walter, would you happen to still have the gerbers for the 4-layer variant of the PCB? Thanks!

Site Admin
Posts: 88
Joined: 13 May 2018, 08:00

Re: Finding parts?

Post by walter » 09 Oct 2020, 07:16

No, I don't.

We never made a 4-layer board, it was Dave from EEVblog that made it.

Posts: 25
Joined: 20 Nov 2018, 08:54

Re: Finding parts?

Post by jbailey » 20 Oct 2020, 03:11

bzztbomb wrote:
18 Aug 2020, 18:07
Thanks Walter!

I think I may have found a surplus spot with the crystals. There are here if anyone else is on the hunt for parts: ... ON/MP062E/

I'll try building the resistor array and see what happens.

Thanks for such a quick response!
I haven't try tested these yet, but it looks like Mouser has them too: ... n7Cg%3D%3D

Just incase this is helpful to anyone.

Site Admin
Posts: 88
Joined: 13 May 2018, 08:00

Re: Finding parts?

Post by walter » 21 Oct 2020, 13:26

The original kit included exactly that part, also from Mouser. So it will work.

Posts: 25
Joined: 20 Nov 2018, 08:54

Mouser BOM (Orderable parts list)

Post by jbailey » 22 Oct 2020, 04:52

Hello fellow Futture Gigatron hackers,

I wanted to create another Gigatron W/Pluggy McPlugFace. Since the official kits are no longer available, I made a Mouser BOM based on Walter Belgers BOM (dated 20200623).

However I did have to make a couple of substitutions:
  • LED: Same manufacture and nearly the same part (I believe this should work)
  • EPROM: Used an OTP (One Time Programmable) EPROM, see note
  • RAM: Different manufacture but should be electrically comparable
  • Resisters: Different manufacture but should be compatible
  • Sockets: Different manufacture but electrically compatible
  • The EPROM in this BOM can't be re-programmed so if you want to be able to update the firmware later, it would be better to get an EEPOM or UV erasable EPROM If possible.
  • You will need to order the Printed Circuit Board (PCB) from,, or others. You will need to download the gerbers files from this website and upload them to the PCB manufacture of your choice. Make sure to get PCB's for both the Gigatron and the Pluggy McPlugFace (PS/2 keyboard adapter). The BOM below will NOT include the Gigatron or Pluggy McPlugFace PCB.
  • This BOM doesn't include the Game Controller, if you hunt this down make sure its a version that is for 5 volts DC.
  • You will want to download the "assembly and user manual" from this website which includes a very detailed build instructions for this kit. The creators also made a series of videos which walks you though the build process.
  • You will also need to download the Gigatron ROM image file from Github I recommend the v4 rom as its known to be a very stable version, v5a (for experienced hackers) it has some new API's, 6502 vCPU core, and ect. but it's not as "time tested" as v4.
  • I am in no way affiliated with this project, I am just someone who really appreciates what Marcel van Kervinck and Walter Belgers created out of a small set of gates and some genus machine code!
  • This kit has been open sourced so anyone can create one and learn from it (or even expand it), however the creators don't support kits not ordered from Gigatron.IO. So you are on your own, unless someone from the community is willing and able to help with questions.

Other then the above, everything else should match Mr. Belgers specifications exactly. My goal was to make it easier for the first time builder to acquire the electronics. The BOM with US shipping is about $82.00 US. You'll probably save money if you are willing to acquire some parts from other companies.

BETA BOM (I ordered this and will confirm shortly) ... 932fcbea48

Once my order comes in i'll update this message confirming if the parts worked as expected.

If you are interested in how a CPU actually works or just interested in building a "retro" computer this kit is worth your time. Their is a lot of learning potential and some fun to be had to boot!


A couple of items in my BOM were back ordered:
  • C4 - Main power supply capacitor
    R9 - Resistor network for the audio DAC
    150 ohm resistors - used for VGA color DAC
    J3 - VGA monitor connector
Even with the missing components I am getting the blinkenlights sequencing correctly, so I am running code and my scope is showing a good VGA single. I'll update the post once I confirmed the remaining components are installed and the system has been fully checked out.

Thank you, Jim.

Post Reply