PS2 KEYBOARD INTERFACE HOUSING

Using, learning, programming and modding the Gigatron and anything related.
Forum rules
Be nice.
Post Reply
lgiscl
Posts: 1
Joined: 08 Oct 2018, 21:18

PS2 KEYBOARD INTERFACE HOUSING

Post by lgiscl » 11 Oct 2018, 16:20

Hi ,

I designed a small housing for the ps2 keyboard interface shipped with my Gigatron kit.
I printed it with my anycubic 4max, the stl file is attached.
I used PLA @ 0.2 mm thickness with supports and 25% filling.

Best regards
Attachments
IMG_1295.gif
IMG_1295.gif (311.06 KiB) Viewed 217 times
IMG_1294.gif
IMG_1294.gif (312.67 KiB) Viewed 217 times
KeyGIG.zip
(6.39 KiB) Downloaded 13 times

walter
Site Admin
Posts: 10
Joined: 13 May 2018, 08:00

Re: PS2 KEYBOARD INTERFACE HOUSING

Post by walter » 11 Oct 2018, 16:32

Nice job!

I should add that this is for the first version of the board. The later version (that has the name Pluggy McPlugface on it) is of a different size.

Post Reply