Double your RAM:

Using, learning, programming and modding the Gigatron and anything related.
Forum rules
Be nice. No drama.
Posts: 433
Joined: 14 May 2018, 08:29

Re: Double your RAM:

Post by at67 »

Nice pics, discreet job like cde's, welcome to the club.
Posts: 37
Joined: 11 Jul 2021, 22:12

Re: Double your RAM:

Post by giobbi »

hi all,

I finally made the 64k upgrade. I decided for a different solution, I put a socket that can be used for both 32k and 64k chips.

Since I hadn't a 32 pin socket (and frankly I'm too lazy to remove a 28 pin socket if I can avoid it :lol:) I decided for a Frankenstein socket: I cut a portion of the socket (pins 1,2,3 and 26,27,28) and I removed it. Then I built the replacement in a MacGyver way:
IMG_20210819_090710.jpg (309.48 KiB) Viewed 1674 times
I lowered the 4 (2+2) extra pins with the Dremel, so they don't touch the board (I checked it out later passing a piece of paper between the pins and the board: the papel have to pass freely behind the pins to be sure they're far enough from the board to prevent any unwanted contact).
IMG_20210819_090700.jpg (99.23 KiB) Viewed 1674 times
The red wire (A15 line) comes from an old, burnt pinball coil; it's very well insulated (it's hard to remove the red coating) and thin enough to pass between two socket pins
IMG_20210827_120524.jpg (384.54 KiB) Viewed 1674 times
And here we have the 64k RAM chip installed:
IMG_20210827_120623.jpg (185.63 KiB) Viewed 1674 times
And of course the Gigatron liked it :-)
IMG_20210827_120739.jpg (708 KiB) Viewed 1674 times
IMG_20210827_120456.jpg (641.89 KiB) Viewed 1674 times
Posts: 44
Joined: 30 Sep 2020, 22:19

Re: Double your RAM:

Post by Sugarplum »

That's a neat way to do that.
Post Reply