Pluggy Reloaded
Forum rules
Be nice. No drama.
Be nice. No drama.
Re: Pluggy Reloaded
There's a lot to take in in this thread, but one question I immediately have. Are any of these still available, by any chance?
Re: Pluggy Reloaded
While he has sold kits on here before, he also posted the Gerber for people who are willing to make their own kits. This give you the option of ordering PCB's from PCBway.com, JLCPCB.com or other stable manufacture. None of the parts are hard to obtain and it's an easy kit to put together. Probably the hardest part is programming the micro controller (which is not bad at all).
Re: Pluggy Reloaded
Hi RetroCode,
I do have plenty of stock left and would bei happy to sell. But of course you can also build the board yourself from the open sourced schematic.
I'll send you a PM in case you are interested in getting the kit.
Best Regards
Paul
I do have plenty of stock left and would bei happy to sell. But of course you can also build the board yourself from the open sourced schematic.
I'll send you a PM in case you are interested in getting the kit.
Best Regards
Paul
Re: Pluggy Reloaded
Thanks for the replies everyone! And thanks especially to @norgate
Re: Pluggy Reloaded
Hi norgate! I would love to order one as well!
I just got my gigatron put together the other week and my dying to try out some of the software that's been written by this talented group!
Re: Pluggy Reloaded
I should add that mine did arrive over the weekend (thanks @norgate!), and I've started to assemble it, but want to get a couple of pin headers so I don't have to solder the SD adapter or Ardiuno unit directly to it before continuing. Might be a while before I can actually use it, but I am looking forward to getting it working.
Re: Pluggy Reloaded
@Serion Thanks for your interest I sent you a PM regarding your order.
@RetroCode Awesome! the headers are definetly a nice addition. Be sure to let me know if you come across any problems.
@RetroCode Awesome! the headers are definetly a nice addition. Be sure to let me know if you come across any problems.
Re: Pluggy Reloaded
Huge, huge thanks to norgate! He truly has the patience of a saint to put up with all my questions! I was going to order a kit from him. However, since I'm in the States shipping is going to be crazy expensive.
So a couple questions for the group:
1) Does anyone in US have enough extra parts for a kit and would be willing to sell me a full kit?
2) Can anyone recommend a supplier in the US for the parts?
Thanks!
So a couple questions for the group:
1) Does anyone in US have enough extra parts for a kit and would be willing to sell me a full kit?
2) Can anyone recommend a supplier in the US for the parts?
Thanks!
Re: Pluggy Reloaded
Parts list is here:
https://forum.gigatron.io/viewtopic.php ... t=20#p1080
Some big online US component distributors are:
https://www.mouser.com/
https://www.chip1stop.com/USA/en
https://www.digikey.com/
https://forum.gigatron.io/viewtopic.php ... t=20#p1080
Some big online US component distributors are:
https://www.mouser.com/
https://www.chip1stop.com/USA/en
https://www.digikey.com/