Hi all,
This is my first post on this forum as I have very recently built a Gigatron TTL. This one lives in northern Greece.
I also needed a 3D printed case for it, so I designed one inspired by djones60's initial 3D model found in thingiverse.
You can find the STLs here https://www.thingiverse.com/thing:6778935
Another 3D printed case for the Gigatron TTL
Forum rules
Be nice. No drama.
Be nice. No drama.
Another 3D printed case for the Gigatron TTL
- Attachments
-
- 1729077271631.jpg (2.47 MiB) Viewed 435 times
-
- 1729077271636.jpg (2.33 MiB) Viewed 435 times
-
- 1729077271622.jpg (2.1 MiB) Viewed 435 times
-
- 1729077271642.jpg (2.33 MiB) Viewed 435 times
Re: Another 3D printed case for the Gigatron TTL
Welcome, pretty cool design.
Re: Another 3D printed case for the Gigatron TTL
Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.
Re: Another 3D printed case for the Gigatron TTL
Yes, I think so. The stand carries no screws or anything. You just push one piece into the other. What I don't know is if the Pluggy Reloaded PCB protrudes and then the case leans forward.
Re: Another 3D printed case for the Gigatron TTL
download/file.php?id=572
Looks like the PS2 keyboard is the issue in that orientation.