Another 3D printed case for the Gigatron TTL

Using, learning, programming and modding the Gigatron and anything related.
Forum rules
Be nice. No drama.
Post Reply
AnestisZX
Posts: 3
Joined: 27 Sep 2024, 07:30

Another 3D printed case for the Gigatron TTL

Post by AnestisZX »

Hi all,

This is my first post on this forum as I have very recently built a Gigatron TTL. This one lives in northern Greece.
I also needed a 3D printed case for it, so I designed one inspired by djones60's initial 3D model found in thingiverse.

You can find the STLs here https://www.thingiverse.com/thing:6778935
Attachments
1729077271631.jpg
1729077271631.jpg (2.47 MiB) Viewed 445 times
1729077271636.jpg
1729077271636.jpg (2.33 MiB) Viewed 445 times
1729077271622.jpg
1729077271622.jpg (2.1 MiB) Viewed 445 times
1729077271642.jpg
1729077271642.jpg (2.33 MiB) Viewed 445 times
at67
Site Admin
Posts: 653
Joined: 14 May 2018, 08:29

Re: Another 3D printed case for the Gigatron TTL

Post by at67 »

Welcome, pretty cool design.
bmwtcu
Posts: 152
Joined: 01 Nov 2018, 12:02

Re: Another 3D printed case for the Gigatron TTL

Post by bmwtcu »

Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.
AnestisZX
Posts: 3
Joined: 27 Sep 2024, 07:30

Re: Another 3D printed case for the Gigatron TTL

Post by AnestisZX »

bmwtcu wrote: 18 Oct 2024, 09:26 Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.
Yes, I think so. The stand carries no screws or anything. You just push one piece into the other. What I don't know is if the Pluggy Reloaded PCB protrudes and then the case leans forward.
AnestisZX
Posts: 3
Joined: 27 Sep 2024, 07:30

Re: Another 3D printed case for the Gigatron TTL

Post by AnestisZX »

at67 wrote: 16 Oct 2024, 22:22 Welcome, pretty cool design.
Thanks. I have cut a piece of plexiglass to try it on as well. A logo engraving on the plexiglass might also be interesting...
bmwtcu
Posts: 152
Joined: 01 Nov 2018, 12:02

Re: Another 3D printed case for the Gigatron TTL

Post by bmwtcu »

AnestisZX wrote: 21 Oct 2024, 11:07
bmwtcu wrote: 18 Oct 2024, 09:26 Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.
Yes, I think so. The stand carries no screws or anything. You just push one piece into the other. What I don't know is if the Pluggy Reloaded PCB protrudes and then the case leans forward.
download/file.php?id=572
Looks like the PS2 keyboard is the issue in that orientation.
Post Reply