Zoom rotator [test]

[Phibrizzo]

Hello

I wanted to transfer one demo effect like in this old intro:
https://www.youtube.com/watch?v=_YklhD7 ... e=youtu.be

I did it, but doesn't look impressive
64k needed.

rotate.gt1

(345 Bytes) Downloaded 444 times

Edit: i did some optymalisations. Now is little bit faster.

rotate2.gt1

(334 Bytes) Downloaded 443 times

[petersieg]

Thx.
In gtemuAT67 with ROMv5a it runs. It looks like attached pictures.
In gtemuAT67 with ROMv6 it crashes?
In real hardware, with ROMv6 and 128k RAM, it runs, and looks similiar (but not identical) to attached pictures.

best, Peter

[Phibrizzo]

Thanks for testing.

Yes, i dont know why emulator is freezing after 5-10 minutes.
On real hardware is ok. Maybe is something like leak to memory (hit).
I did all tests on ROMv5a/6 and 64 kB.

[Phibrizzo]

Hello

I rewrote all code to vX0 asembler. Now is much faster but without rave

Source: http://changeit.ppa.pl/ftp/rotator_vx0.asm

[lb3361]

Here is another one, with adjusted ambitions and a brutal implementation.
This is for a dev7 machine with at least 64k.
You can run it on https://www.gigatron128k.com

[lb3361]

Here is a slightly better one.

The previous one worked by compiling a table of pixel addresses to copy. This one works by generating a vCPU routine to the same effect but twice faster (allowing for a 40% greater image size). It is also a little less robust because it does not scan the image in a spiral (for speed reasons) but always scans left to right or top to bottom. As a result it is easier to overwrite parts of the image than we'll need later. The remedy is to carefully select the rotation angle and the zoom factor. However this changes makes it also work quite well on ROMv6 (or even ROMv4!)

[Phibrizzo]

Hello

Your effect is very spectatular
I tested previous version for dev7 on real hardware but not working. Propably i have too old version of this rom.
I hat to use emulator.
Where can i find latest version of dev7 rom?

Second version woking very well on ROMv6.

[lb3361]

https://github.com/lb3361/gigatron-rom

I added the leeks/lokea/copys instructions on Oct 19 and also changed the c compiler to take advantage of them. This means that program compiled with the head version of the compiler no longer run on earlier roms (but the converse works). I guess that was the problem…

The speed difference between the v6 and dev7 versions is negligible. The speed difference of running the v6 version on romv6 or dev7 is also negligible. I am less happy about the fact that one loses 10% when running on the dedicated 128k rom (dev128k7.rom) which steals two cycles from each vCPU scanline to distinguish the selected video bank from the vCPU bank. This should be less than 1%, but sometimes, when executing a very repetitive program, it can change how instructions are scheduled in ways that cause additional costs.

Update: I found a fix by using PEEKA(vAC) [24 cycles] instead of PEEK() [26 cycles], making the dev7 version a tad faster, fast enough to work around the packing problems. See https://github.com/lb3361/gigatron-lcc/ ... ff/rotator