PS2 KEYBOARD INTERFACE HOUSING
Posted: 11 Oct 2018, 16:20
Hi ,
I designed a small housing for the ps2 keyboard interface shipped with my Gigatron kit.
I printed it with my anycubic 4max, the stl file is attached.
I used PLA @ 0.2 mm thickness with supports and 25% filling.
Best regards
I designed a small housing for the ps2 keyboard interface shipped with my Gigatron kit.
I printed it with my anycubic 4max, the stl file is attached.
I used PLA @ 0.2 mm thickness with supports and 25% filling.
Best regards