Gigatron 128k emulator online.

[lb3361]

The purpose of http://www.gigatron128k.com is shamelessly show that the Gigatron 128k is a sweet machine.

Emulation

The site runs a variant of Phil Thomas' excellent JavaScript Gigatron emulator with added code to simulate a 128k RAM&IO expansion board and a SD card connected to the first SPI port. The rom contains the 128k hack that allows it to run big programs such as MSCP (see https://forum.gigatron.io/viewtopic.php?p=3617#p3617).

The menu entry "SpiCard" can be used to browse the SD card and select a program. The preloaded SD card contains a copy of the Apps repository (with MSCP) and recent copy of the GT1 repository. You can also mount your own FAT formatted disk image as you see fit. Everything runs inside your browser. Nothing goes back to the web site. Loading from the SPI card is about 8 times faster than using the Loader protocol.

To return to the main menu at any time, press the button "Start" for about three seconds.

gig128k.png (821.38 KiB) Viewed 4359 times

How to make a Gigatron 128k?

You first need a normal Gigatron. The easiest way is then to build the "dual drive" version of Hans61's expansion board. This recreation of Marcel's original design only uses simple components and is therefore easy to build (far easier than the boards I designed in the past!).

• PCB: Gerber file at https://github.com/hans61/Gigatron-TTL/ ... -dualdrive
• RAM: 1 x AS6C1008. (128KB x 8 ram, DIP32, in production) with a socket.
• Chips: 1 x 74HCT00, 1 x 74HCT32, 1 x 74HCT125, 1 x 74HCT273. Alternatively 74LSxxx instead of 74HCTxxx.
• Discrete components: 5 x 100nF capacitors, 2 x 3.3k resistor, 2 x 10k resistors, 2 small leds.
• Connectors: 2 x 14 pin vert header (e.g. Preci-Dip 350-80-114-00)
• SPI connectors: 2 x 6 pin horizontal socket (e.g. Sullins PPPC061LGBN)
• One wire to connect A15 on the Gigatron to the board.
• One or two SPI SD card 5.5v breakouts

Hans61's expansion board below:

giga-dd.jpg (173.73 KiB) Viewed 4359 times

Sources

The code for the emulator is at https://github.com/lb3361/gigatron-rom/ ... tils/runjs. The SPI and SD emulation code is a port of the C++ code I wrote for gtemuAT67 a couple years ago, a pretty tricky state machine. The code for the ROM is at https://github.com/lb3361/gigatron-rom/tree/master, all under usual open-source licenses.

[petersieg]

Thanks a lot for this updated online emulator!
Great work done.

All the best for 2024!

Best, Peter

[petersieg]

To whom it my concern.

This online emulator also works under Mac OSX 10.7 Lion with Firefox 68.12.0p3
See picture.

Thx, Peter

[petersieg]

Hmm. I thought, that when I call the complete url inside a local copy of runjs of file main.js:
const romUrl = 'http://www.gigatron128k.com/gigatron.rom';

That it would work - but it doesn't? If I call the url in any browser, gigatron.rom is downloaded, so the file is there.

On my old 10.13 iMac with homebrew, to install node.js is almost impossible because of that many dependencies and the amount of errors I get within this old environment, by trying to solve all dependencies.

I know, that there are also possibilities, to have a file/rom loaded locally..?

Thx, Peter

[petersieg]

ok. found the following solution.
Download runjs directory.
Download gigatron.rom and place it also in src directory under runjs.
CD into src directory.
Issue the following python3 command to start a simple http server:
ichs-iMac:src ich$ python3 -m http.server --cgi 8080
Serving HTTP on :: port 8080 (http://[::]:8080/) ...

Start firefox with url:localhost:8080
This starts index.html

Now it runs locally.. verified to work here.

Thx, Peter

[lb3361]

You might have to ask for ‘gigatron.rom.gz’ and ‘sd.vhd.gz’ because the web server is configured to use precompressed files if available. Or just go to the source (see initial post) https://github.com/lb3361/gigatron-rom/ ... tils/runjs

As for note, doing brew install ‘node’ and ‘http-server’ should be sufficient.

[petersieg]

As I said, 10.13 is too old - lot of errors trying to solve dependencies.
But it works now as stated above. And python3 is already required by glcc and compilegcl.py

Peter

[lb3361]

I tried the python solution. In fact you have convinced me that I should change the repository to use python when you write "make runjs".
However the online version benefits a lot from compression the binary files (gigatron.rom and sd.vhd), so it will have to be different.

[lb3361]

I changed to python's http server.
In fact I wrote a subclass in file 'http-server.py' that disables the caches and serves pre-compressed files when available.
See https://github.com/lb3361/gigatron-rom/ ... tils/runjs

From the gigatron rom directory, you can type :

Code: Select all

make runjs DEV=dev128k7.rom

[petersieg]

One can also just download runjs, place a gigatron.rom inside html directory.
Start ./http-server.py
Start browser with url: localhost:8000

(Your solution does not work under python 3.6 (import http gives error) and old Mac OS Lion - so I stick with my solution for my local copy)

Thx, Peter