Another 3D printed case for the Gigatron TTL

[AnestisZX]

Hi all,

This is my first post on this forum as I have very recently built a Gigatron TTL. This one lives in northern Greece.
I also needed a 3D printed case for it, so I designed one inspired by djones60's initial 3D model found in thingiverse.

You can find the STLs here https://www.thingiverse.com/thing:6778935

[at67]

Welcome, pretty cool design.

[bmwtcu]

Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.

[AnestisZX]

Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.

Yes, I think so. The stand carries no screws or anything. You just push one piece into the other. What I don't know is if the Pluggy Reloaded PCB protrudes and then the case leans forward.

[AnestisZX]

Welcome, pretty cool design.

Thanks. I have cut a piece of plexiglass to try it on as well. A logo engraving on the plexiglass might also be interesting...

[bmwtcu]

Nice work! Just curious if the case can be mounted on the stand in either orientation. I'd prefer to have my Pluggy Reloaded at a lower CG and the USB cable up top.

Yes, I think so. The stand carries no screws or anything. You just push one piece into the other. What I don't know is if the Pluggy Reloaded PCB protrudes and then the case leans forward.

download/file.php?id=572
Looks like the PS2 keyboard is the issue in that orientation.